Single-phase LV
Hybrid Inverter
6-8kW

10ms off-grid switching
200% rated overload capacity
60V low-voltage startup
IP66 high protection rating

Single-phase LV
Hybrid Inverter
10-12kW

10ms off-grid switching
200% rated overload capacity
60V low-voltage startup
IP66 high protection rating

Three-phase LV Hybrid
Inverter(on-grid)
8-12kW

Maximum charge/discharge current: 240A
Up to 10 units can operate in parallel
Supports unbalanced three-phase loads
IP66 high protection rating
Supports diesel generator connection

Three-phase LV Hybrid
Inverter(on-grid)
15-20kW

Maximum charge/discharge current: 240A
Up to 10 units can operate in parallel
Supports unbalanced three-phase loads
IP66 high protection rating
Supports diesel generator connection

Single-phase HV Hybrid
Inverter (grid-tied)
7.2 kW

Maximum 20A charge/discharge current
EPS switching time: <10ms
97.5% maximum conversion efficiency
Fanless natural cooling
IP66 high protection rating

Battery Pack
(Wall-Mounted)

Wall mounted installation, saving space
Multiple parallel machines, convenient for expansion, automatic addressing, no need to dial code
Standard LED display screen, real-time understanding of battery status, screen direct inverter
Communication protocol
Environmentally friendly and pollution-free materials, free of heavy metals, green and environmentally friendly
The standard cycle life exceeds 5000 times
Remote viewing error, online software upgrade

Battery Pack
(Vertical)

Optimized for self-consumption in residential and commercial applications
High inverter compatibility
LiFePO4 battery, offering higher safety, longer cycle life, and better power performance
Caster wheel design simplifies transportation and installation
Displays SOC status and battery information

Three-phase HV Hybrid
Inverter
12-20kW

IP66 high protection rating
Maximum 50A battery charge/discharge current
Supports three-phase unbalanced loads
10ms Off-grid Switching
Supports up to 16 units in parallel
Diesel generator input

PV and Battery All-In-One

Up to 120A max charge/discharge current
Support off-grid application of diesel generator
UPS level switching time (<10ms) supportingcritical loads all the time
Support grid connected operation
Flexible schedule the inverter charging anddischarging time.
of MPPT current input to power solar panels

Single Phase Hybrid
Inverter (off grid)
4-12kW

Pure sine wave solar inverter(off Grid)
Power factor 1.0
Inverter can run without battery
Automatic activation with built-in lithium battery
Built in 160A(7.2kw/8.2kw)/180A(10.2kw)
High PV input voltage range(90~500VDC)
One-key restoration to factory Settings

Single-phase LV
Hybrid Inverter
3–6kW

Max. 120A Battery Charge/Discharge Current
15A MPPT Current, Supports High-Power Modules
Supports Diesel Generator Connection
Supports Motor Load Connection
UPS Grid/Off-Grid Switching Time for Critical Loads Under 10ms

Battery Pack(Rack-Mounted)

Suitable for cabinets and solar energy storage systems
Battery status display
A-grade lithium iron phosphate battery
Up to 15 parallel units can be connected to expand the power capacity
Multiple parallel machines for easy expansion; Automatic addressing, no need to dial code
Easy installation, convenient operation and maintenance

Stackable Low-Voltage Battery

Summarize all battery information on both Chinese and English display screens, and communicate directly with the inverter on the screen
One click power on/off of the system
Automatic coding and parallel operation between PACK groups without the need for manual settings
Bluetooth+WiFi solution, can be viewed and operated remotely, and can be accessed through a mobile app
Multi cluster parallel operation, supporting up to 32 battery packs in parallel

Stacking High-Voltage Batteries

Easy to Transport and Install
High-Voltage LiFePO4 Battery Solution, Single Module 102.4V / 50Ah / 5.12kWh
Suitable for Grid-Tied or Hybrid Grid-Tied and Off-Grid Solar Energy Storage Systems
Cobalt-Free Lithium Iron Phosphate (LFP) Battery with Higher Safety, Cycle Life, and Power Performance
Flexibly Adjustable According to Instructions

C&I Hybrid Inverter
PowerPilot (100KW-630KW)

Modular Design, Easy Transport and Installation, Significantly Shortened Construction Cycle
Highly Integrated, Modular PV Controller Design, Easy to Expand
Grid/Off-Grid Switching Time ＜20ms, Suitable for Diverse Scenarios
Supports Parallel Operation, Diesel Generator Connection, and SCR＜1.5 Weak Grid Connection

C&I All in One BESS PowerPilot
(500KW/1MWH&1MW/2MWH)

Off-Grid/Grid Switching Time ＜20ms, Capable of Controlling Diesel Generators
Easy Transport and Installation, Significantly Shortened Construction Cycle
Cycle Life ≥6000 Cycles, Safe and Reliable, Excellent Performance
Standard Local Monitoring EMS, Enables Remote Viewing of System Information
IP54 High Protection, 100% Unbalanced Load Capability

C&I Energy Storage Converter

Switching time between on-grid and off-grid:<20ms
Maximum efhciency>99.1%
Support parallel operation, support diesel-electric connection,weak grid connection SCR<1.5

Energy Storage PCS

Three level modular design, bidirectional energy conversion
On demand allocation, peak shaving and valley filling, local automatic operation
No vulnerable parts, modular with N+1 redundancy

Three-phase Photovoltaic Inverter
80-110K

Maximum efhciency 98.7%, ultra-low starting voltage,ultra-wide voltage range
Supports 1.5 times DC over-capacity, adapts to highcurrent components up to 20A
High protection level lP66 intelligent air cooling
Supports DC arc intelligent detection (optional) Possessadaptability to weak power grids
One-time frequency modulation, P-F, Q-U and otheroperating modes

Three-phase
Photovoltaic Inverter
10-25K

IP66 highprotection level
MPPT curent 32A, suitable for high-power components
IP66 highprotection level
Adaptive complex power grid
Intelligent remote monitoring and maintenance to enhance operational efficiency
Support anti backflow control

Three-phase photovoltaic inverter25-50K

Maximum MPPT current 40A, suitable for high power anddouble-sided groups
Built-in PlD repair function to improve the power generationperformance of components
IP66 high protection level
Quick-plug terminal design, simple and fast wiring
OTA online fmware remote upgrade, worry-free system update

Integrated Energy Storage Cabinet
135kW/261kWh

High quality battery cells have a long cycle life, superior performance, good consistency, safety and reliability, and a cycle life of ≥ 6000 times
Design lifespan>; 10 years
Integrated design, single cabinet PACK, PCS, EMS, highly integrated fire protection system, high space utilization rate

Three-phase
Integrated PV & Storage LV Cabinet

Off-Grid/Grid Switching Time ＜20ms, Capable of Controlling Diesel Generators
Supports Self-Consumption and Anti-Reverse Flow Modes
Modular Design, Supports Quick Replacement
Supports Up to 200% Output

Solid-State Transformer (Indoor)
1.25MW/2.5MW

Solid-State Transformer (Outdoor)
1.25MW/2.5MW

Redundant Power Module Design for Higher Stability
Compact Design, Power Density 190W/L
Smart Intermittent Mode, Standby Power Consumption as Low as 500W
All-SiC Power Devices, Three-Level Topology Architecture

Long-Duration Energy Storage PCS
250K-800K

High Dynamic Response, Full-Load Switching Time as Low as 10ms
Supports Multi-Unit Parallel Operation, Expandable up to 2MW
Independent Active and Reactive Power Adjustment, Improving Power Quality

AC-Type Balancer

Can Accept EMS Dispatch from Vanadium Flow Battery Systems
Communication Methods Include RS485, CAN, Ethernet, etc
BMS Communication Function, Enhancing System Protection and Fault-Tolerance Mechanisms
AC/DC Side Protection Functions for Subsystems, Configurable Equalizer
Limits for Power, Current, Voltage, etc
IP55 Outdoor Protection Design, Convenient for Retrofit Installation in Existing Projects

DC-Type Balancer

BMS communication enhances the system protection and fault-tolerant mechanism
IP54 outdoor protection design, facilitating retrofit installation in existing projects
Bidirectional operation with multiple working modes
including automatic online balancing and dispatch balancing

AC/DC Flexible Interconnection
Complete Equipment for
Distribution Networks

DC Bus Builds DC Distribution Network, Achieves Load Clustering Through DC Distribution Network
Reducing Conversion Stages
Equipped with Voltage Protection, Overcurrent Protection, Overtemperature Protection, Lightning Protection and Other Protection Functions, Ensuring Safe and Stable Operation of the Equipment

Micro-Storage Intelligent Compensation Terminal

Voltage Regulation, Stabilizes Terminal Voltage Around 220V
Short Construction Cycle, Construction Completed Within 2 Hours to Quickly Solve Problems
High-Reliability Design, Overload Protection, Overcurrent and Multiple Short-Circuit Protections
High-Protection Design, IP65 Protection Rating Extends Service Life